Griffin
FIRE PROTECTION

Service Hub
Request Service
BC Specialty Service

Smoke Control
Testing & Consulting

Griffin Fire Protection is a specialist in smoke control systems — providing full CAN/ULC-S1001 integrated systems testing, pressurization verification, and smoke control consulting for high-rise and complex commercial buildings across BC.

Request a Smoke Control Quote →
Testing Standard CAN/ULC-S1001
What Is Smoke Control?

A Critical Life Safety System

Smoke control systems are engineered to manage the movement of smoke during a fire — maintaining safe egress paths for building occupants and supporting firefighter operations. In high-rise and complex commercial buildings, these systems are a mandatory requirement under the BC Building Code.

Unlike standard fire alarm or sprinkler inspections, smoke control testing requires specialized knowledge of building pressurization, HVAC integration, and complex system interdependencies. Not all fire protection companies have this expertise.

Griffin Fire Protection does. We test and consult on smoke control systems as a core specialty — not as an afterthought.

💨
Stairwell Pressurization
Positive pressure maintained in exit stairwells prevents smoke infiltration, keeping egress paths clear for occupant evacuation and firefighter access.
🏗️
Elevator Shaft Pressurization
Pressurization of elevator hoistways and lobbies prevents smoke from spreading between floors via the elevator system.
🌀
Corridor Smoke Exhaust
Mechanical exhaust systems remove smoke from corridors and floor areas, maintaining visibility and tenable conditions.
🏛️
Atrium Smoke Management
Large-volume smoke management systems for atrium spaces per NFPA 92 and BC Building Code design requirements.
Systems We Test & Consult On

Full-Scope Smoke Control Services

💨
Stairwell Pressurization
Positive pressure systems maintaining tenable egress conditions. Pressure differential and door force testing per NFPA 92.
🛗
Elevator Shaft Pressurization
Hoistway and lobby pressurization systems protecting against inter-floor smoke migration via elevator shafts.
🌀
Smoke Exhaust Systems
Mechanical exhaust systems for corridors, floor areas, and parking. Airflow measurement and fan performance verification.
🏛️
Atrium Smoke Management
Large-volume smoke management systems per NFPA 92. Filling time calculations, exhaust rate verification, and makeup air balance.
💨
Make-Up Air Systems
Replacement air systems verified to support exhaust performance. Pressure balance confirmation across all system operating modes.
🔗
Fire Alarm & HVAC Integration
CAN/ULC-S1001 integrated testing of fire alarm, HVAC, and smoke control interlock sequences under simulated fire conditions.
How It Works

Our Testing Process

CAN/ULC-S1001 integrated systems testing is a multi-phase process requiring careful coordination between the fire protection specialist, mechanical contractor, fire alarm technician, and building operations. Griffin Fire Protection manages this coordination for you.

1
Pre-Test System Review
We review mechanical drawings, fire alarm sequences, and the smoke control system design to identify test scope and coordination requirements.
2
Coordination with Trades
We coordinate testing schedules with your mechanical contractor, fire alarm technician, and building operations team.
3
Functional Testing
Full integrated systems testing — triggering smoke control sequences via the fire alarm system and verifying all system responses, pressures, airflows, and interlocks.
4
Deficiency Identification
Any system failures or non-conformances are documented with specific corrective actions for the responsible trade.
5
AHJ Report Preparation
A comprehensive test report is prepared, suitable for submission to your Authority Having Jurisdiction (AHJ) to satisfy code compliance requirements.

Applicable Standards

CAN/ULC-S1001
Integrated Systems Testing of Fire Protection and Life Safety Systems — the primary standard governing smoke control testing in Canada.
NFPA 92
Standard for Smoke Control Systems — design and performance criteria for smoke management systems.
BC Building Code
Part 3 requirements for smoke control in high-rise buildings, atriums, and complex occupancies.
BC Fire Code
Ongoing maintenance and testing requirements for smoke control systems in existing buildings.
ASHRAE 62.1
Referenced for ventilation and HVAC performance standards relevant to smoke control system design.

Available to Fire Contractors
on a Subcontract Basis

If your fire protection company encounters a smoke control scope that requires a specialist, Griffin Fire Protection is available to support your project quietly and professionally. We work behind the scenes — you maintain your client relationship.

Discuss a Subcontract Arrangement →
Full CAN/ULC-S1001 integrated systems testing capability
Coordination with your mechanical and alarm trades
AHJ-ready test reports prepared under your project
Confidential — your client relationship protected
Available throughout the Lower Mainland and BC
Pre-test consulting and troubleshooting support

Ready to Schedule Smoke Control Testing?

Contact Griffin Fire Protection to discuss your project, timeline, and testing requirements.

Request a Quote →